BENDIX TCH-003-022 Manuel d'utilisateur télécharger pdf

Technical Bulletin

Bulletin No.: PRO-03-22 Effective Date: 4/1/80 Cancels: N/A Page: 1 of 1

Subject: R-10 RELAY VALVE INSTALLATION

When installing an aluminum adapter, such as 243505 (catalog page 03-B-7), in the

supply port of the R-10, a thread lubricant and sealer should be used. This is necessary

because the valve body and adapter are both aluminum and as the adapter is threaded

into the body, the fiction and torque will cause the threads to bond together prohibiting

subsequent removal of the parts. Maximum torque when installing 243505 is 180-240

inch pounds.

Examples of the type of sealant/lubricant that can be used are Never-Seez or Locktite

Thread Sealant with Teflon or Teflon tape. If Teflon tape is used, apply the tape at least

one thread back from the end. This assures that tape shreds will not enter the valve.

Lubricant/sealants must be used when male and female pipe threads of similar materials

are joined.

Technical BulletinBulletin No.: PRO-03-22 Effective Date: 4/1/80 Cancels: N/A Page: 1 of 1Subject: R-10 RELAY VALVE INSTALLATIONW

Pas de commentaire

BENDIX TCH-003-022 Manuel d'utilisateur