287691 the revised check valve assemblies are included

in the kit and the old ones should be discarded. If the old

ones are being reused, the following applies:

1. Insert the rubber check valve (1) into the spring guides

(2). See Fig. 7.

2. Position the check valve springs (3) into the spring

guides and over the end of the rubber check valve (1)

with a twisting motion.

3. Drop the check valve and guide assemblies into their

respective bores in the valve body and install the two

3/8” socket head pipe plugs (18) and torque from 140

to 170 inch pounds.

REASSEMBLY OF CURRENT DESIGN CHECK VALVES

(Figure 8)

1. Assemble the springs to each of the check valves with

a twisting motion.

2. Drop the assemblies into their respective bores in the

valve body and install the 3/8” pipe plugs. (19)

REASSEMBLY OF CONTROL PISTON

1. Insert the ﬂ at rubber inlet and exhaust valve (5) into the

valve body.

NOTE: The ﬂ at side of the valve with the four ears

protruding rests against the inlet and exhaust valve

seat.

2. Install the inlet and exhaust valve spring (6) making

sure the spring is aligned and rests evenly on the four

ears of the inlet and exhaust valve.

3. Install the o-ring (7) in its proper groove on the reser voir

port ﬁ tting (15).

4. Properly align the inlet and exhaust valve spring in the

recess at the end of the reservoir port ﬁ tting. Install the

ﬁ tting and torque from 200 to 300 inch pounds.

5. Install the three o-rings (1) and (2) in their respective

grooves on the control piston (14).

6. Drop and position the piston spring (3) into the valve

body.

7. Making sure all parts are properly aligned, install the

control piston (14) in the valve body.

8. Re-install the control piston cover (12) in its proper

position. Reference instruction # 5 under Removal and

Disassembly of control piston, for proper positioning,

screws (13) should be torqued from 40 to 60 inch

pounds.

9. If so equipped, re-install the screw (19), washer (20),

and exhaust diaphragm (11) in the control piston exhaust

port. Torque screw from 15 to 25 inch pounds.

REASSEMBLY OF PRESSURE PROTECTION PISTON

1. Install the o-ring in its respective groove on the pressure

protection piston (8), and install the piston assembly in

the valve body.

2. Position the spring (9) and spring retainer (17) on top

of the pressure protection piston assembly, and secure

with the four round head machine screws (16). Screws

should be torqued from 20 to 30 inch pounds.

TESTING THE REBUILT SR-2

™

TRAILER SPRING

BRAKE VALVE

Test the rebuilt SR-2

™

trailer spring brake valve by

performing the operation and leakage tests outlined in the

Service Checks section of this manual.

WARNING! PLEASE READ AND FOLLOW

THESE INSTRUCTIONS TO AVOID PERSONAL

INJURY OR DEATH:

When working on or around a vehicle, the following

general precautions should be observed at all times.

1. Park the vehicle on a level surface, apply the

parking brakes, and always block the wheels.

Always wear safety glasses.

2. Stop the engine and remove ignition key when

working under or around the vehicle. When

working in the engine compartment, the engine

should be shut off and the ignition key should be

removed. Where circumstances require that the

engine be in operation, EXTREME CAUTION should

be used to prevent personal injury resulting from

contact with moving, rotating, leaking, heated or

electrically charged components.

FIGURE 7 - OLD STYLE

FIGURE 8 - NEW STYLE

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Kingston Technology KVR400S4R3A/1G Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Speichermodule Kingston Technology KVR400S4R3A/1G.
Wir stellen 1 PDF-Handbücher Kingston Technology KVR400S4R3A/1G zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt

Kingston technology KVR400S4R3A/1G Datenblatt (1 Seiten)

Marke: Kingston-technology | Kategorie: Memory modules | Größe: 0.16 MB |

Inhaltsverzeichnis

Memory Module Specification

Weitere Produkte und Handbücher für Speichermodule Kingston Technology

Modelle	Dokumententyp
KVR333X64C25K2/256	Datenblatt Kingston Technology ValueRAM Memory 256MB Kit 333MHz DDR PC2700 DIMM CL2.5, 1 Seiten
KVR667D2E5/1G	Datenblatt Kingston Technology ValueRAM 1GB 667MHz DDR2 ECC CL5 DIMM, 1 Seiten
KVR333X64C25/256	Datenblatt Kingston Technology ValueRAM 256MB 333MHz DDR Non-ECC CL2.5 DIMM, 1 Seiten
KVR533D2E4K2/2G	Datenblatt Kingston Technology ValueRAM 2GB DDR2 DIMM, 1 Seiten
KVR333X72C25/1G	Datenblatt Kingston Technology ValueRAM 1GB 333MHz DDR ECC CL2.5 DIMM, 1 Seiten
KVR667D2S5/512	Datenblatt Kingston Technology ValueRAM 512MB 667MHz DDR2 Non-ECC CL5 SODIMM, 1 Seiten
KVR533D2S4/256	Datenblatt Kingston Technology ValueRAM Memory 256MB 533MHz DDR2 CL4 SODIMM, 1 Seiten
KHX6400D2K2/2G	Datenblatt Kingston Technology HyperX Memory HyperX 2GB 800MHz DDR2 CL5 2pk, 2 Seiten
KVR100X64SC2L/256	Datenblatt Kingston Technology ValueRAM Memory 256MB 100MHz Non-ECC CL2 Low Profile SODIMM, 1 Seiten
KVR133X64SC3L/128	Datenblatt Kingston Technology ValueRAM Memory 128MB 133MHz Non-ECC CL3 SODIMM, 1 Seiten
KVR333S8R25/256	Datenblatt Kingston Technology ValueRAM Memory 256MB Reg ECC DDR CL2.5, 1 Seiten
KVR333X64C25/128	Datenblatt Kingston Technology ValueRAM 128MB 333MHz DDR Non-ECC CL2.5 DIMM, 1 Seiten
KRX3200AK2/1G	Datenblatt Kingston Technology Memory HyperX 1GB 400MHz DDR 2pk, 2 Seiten
KVR533D2E4/2G	Datenblatt Kingston Technology ValueRAM 2GB 533MHz DDR2 ECC CL4 DIMM, 1 Seiten
KHX7200D2/512	Datenblatt Kingston Technology HyperX Memory HyperX 512MB 900MHz DDR2 CL5, 2 Seiten
KVR333S4R25/2G	Datenblatt Kingston Technology ValueRAM Memory 2GB 333MHz DDR ECC, 1 Seiten

BENDIX BW1435 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Moteur BENDIX BW1435

Kingston Technology KVR400S4R3A/1G Handbücher

Kingston technology KVR400S4R3A/1G Datenblatt (1 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Speichermodule Kingston Technology