BENDIX BW2000 Manuel d'utilisateur télécharger pdf (Page 19)

5.3.2 Brake Wear Check using Guide Pin (Only for Axial Disc Brakes SB 7541, SB 7551 to SB 7629,

SB 7639 and Radial Disc Brakes SB 7102, SB 7112, SB 7103, SB 7113, SB 7104, SB 7114,

SB 7105, SB 7115, SB 7108, SB7118, SB 7109, SB 7119, SB 7120, SB 7130 - These Callipers do

have the rib in position B (see also Section 5.3.1)

Pad conditions can be visually inspected without

removing the road wheel by noting the positon

of the Floating Pin (4) in the Caliper (1).

If the head of the Floating Pin (4) is inside the

Rubber Bush (6) by a dimension D greater than

0.64in. (18mm), then a more accurate check of the

Pads and Rotor must be made.

If necessary, change the Pads - see Section 6.

B = with rib (see also Section 5.3.1)

C = new condition

D = 0.64in. (18mm) or more, Pads and Rotor must be

checked with road wheel removed

M+P-KN-006

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Pas de commentaire

Marca: Avsl | Categoria: Control panel | Tamaño: 0.28 MB |

Introduction

Maintenance

Packing Contents

Controls:

Rear Section:

Connection Guide:

Operation:

Troubleshooting:

Specification:

Más productos y manuales para Panel De Control Avsl

Modelos	Tipo de documento
Citronic CDM8:4 USB	Manual de usuario AVSL Citronic CDM8:4 USB User Manual, 10 paginas
Citronic CM-DSP	Manual de usuario AVSL Citronic CM-DSP User Manual, 8 paginas