BENDIX BW2768 Manuel d'utilisateur télécharger pdf (Page 11)

Installation

Radar Sensor Location

The Radar Sensor mounting location is key to proper system operation. Ideally,

the Sensor should be centered on the rear of the vehicle at roughly 36" (1 m)

±12" (.3 m) from the ground, and should be a minimum of 5/16" out further than

other surfaces on the back of the vehicle (frame, bumper, box, etc.) to reduce the

possibility of interference with the sensor’s operation. The mounting location should

protect the sensor from impact when backing up to a dock, as well as, providing

an unobstructed view of the rear of the vehicle. The sensor face should also be

perpendicular to the ground.

Before permanently installing the sensor to the vehicle, check to be sure

the area you selected to mount the sensor provides a clear detection zone.

Temporarily attach the sensor in the proposed mounting location, apply power

to the system, and verify nothing is being detected.

36"

Senso r

▲

WARNING

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Pas de commentaire

BENDIX BW2768 Manuel d'utilisateur Page 11