BENDIX TCH-002-006 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non BENDIX TCH-002-006. BENDIX TCH-002-006 User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
The following procedure is for manually caging and/or un-caging (releasing) a Bendix
®
Air Disc Brake Spring
Brake Actuator.
Un-Caging (releasing) the Parking Brake
1) Install the spring brake actuator on the air disc brake (if not previously installed). Refer to service data sheet
SD-23-7541 (BW7308). See Figure 1b.
2) Connect a regulated air line to parking brake port (12) of the actuator (if not connected previously). See
Figure 1a.
3) Gradually supply 100 psi of air pressure to the parking brake port (12) of the actuator.
4) Rotate the release bolt clockwise until resistance is encountered.
5) Seat the release bolt in the un-caged position by applying a torque of 50 lb-ft. The release bolt and push
rod should be in the position shown in Figure 2.
6) With hands clear of moving parts, slowly release the air pressure to the parking brake port (12). Be sure to
exercise caution to prevent pinching of ngers.
Technical Bulletin
Bulletin No: TCH-002-006 Effective Date: 11/1/2007 Cancels: N/A Page: 1 of 2
Subject: Bendix
®
Air Disc Brake Spring Brake Actuator Caging Procedure
© 2007 Bendix Commercial Vehicle Systems LLC 11/2007. All rights reserved. Printed in U.S.A.
Service
Housing
Spring Brake
Housing
Parking Brake (12)
Service Port (11)
Service Housing
Spring Brake Housing
Release Bolt
Push Rod
Figure 1a - Spring brake shown in the caged position.
Figure 1b - Air disc brake assembly
Parking Brake (12)Service Port (11)
Release Bolt
Push Rod
Figure 2 - Spring brake shown in the un-caged (released) position.
(over)
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Technical Bulletin

The following procedure is for manually caging and/or un-caging (releasing) a Bendix® Air Disc Brake Spring Brake Actuator.Un-Caging (releasing) the P

Page 2

Caging the Parking Brake1) Connect a regulated air line to parking brake port (12) of the actuator (if not connected previously). 2) Gradually suppl

Commentaires sur ces manuels

Pas de commentaire