BENDIX TCH-005-001 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non BENDIX TCH-005-001. BENDIX TCH-005-001 User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Technical Bulletin
Bulletin No.: PRO-05-01 Effective Date: 5/23/77 Cancels: PRO-05-01 dated 4/6/76 Page: 1 of 3
Subject: AUTOMATIC SLACK ADJUSTER INSTALLATION
INFORMATION
Every Automatic Slack Adjuster sold through the Aftermarket Division includes
BWS-582 Installation Instructions which contain important information regarding a retrofit
installation. A copy of the instruction sheet was forwarded on Bulletin 05-1 and we
suggest that you retain and carefully review the procedures.
Of particular importance is the statement on page 2 which reads:
IMPORTANT: The position of the adjusting crank and linkage (to the right or left
in Fig. #1) must not be changed in relation to the slack adjuster. Altering the
position of this mechanism (from one side to another) will cause a malfunction.
Also, to insure proper operation, it is recommended that the Bendix Automatic Slack
Adjuster be used in retrofit installations only with chamber sizes of Type 16 or larger.
The Bendix “Sure Stroke” Automatic Slack Adjuster is a device with great sales potential
to the OE specification and retrofit market. However, as with any new device, proper
installation is of prime importance. If you have any questions regarding installation of
the “Sure Stroke”, please contact your Bendix HVSG representative.
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - Technical Bulletin

Technical BulletinBulletin No.: PRO-05-01 Effective Date: 5/23/77 Cancels: PRO-05-01 dated 4/6/76 Page: 1 of 3Subject: AUTOMAT

Page 2

The Bendix Sure Stroke Automatic Slack Adjuster can easily replace most standardslack adjuster installations providing some simple considerations are

Page 3

C. Turn the external ¾” adjusting hex in the direction indicated by the arrow on thecrank arm, until the brake chamber push rod enters the slack adju

Commentaires sur ces manuels

Pas de commentaire