BENDIX BW1571 Manuel d'utilisateur télécharger pdf (Page 8)

INSTALLATION

1. Clean air lines connecting to valve.

2. Inspect all lines and/or hoses for damage and replace

as necessary.

3. Install valve and tighten.

4. Connect air lines to valve (plug any unused ports).

5. Test valve in accordance with the “Operating and

Leakage Tests”.

OPERATING AND LEAKAGE TESTS

Check the tractor dash gauge against a test gauge known

to be accurate prior to performing these tests. Connect

the tractor air lines to the trailer on which the SR-4

™

trailer

spring brake valve is to be tested. Block all wheels, or

otherwise hold both vehicles by a means other than air

brakes during these tests.

TESTING THE REBUILT SR-4

™

VALVE

Test the rebuilt SR-4

™

valve as explained in “Service and

Leakage Tests”.

1 2 3 4 5 6 7 8

Pas de commentaire

BENDIX BW1571 Manuel d'utilisateur Page 8