BENDIX BW2189 Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
10
Your trailer has two wheel speed
sensors and two ABS modulators
that are plumbed for axle control.
The MC-30
controller you have
installed is currently con gured for
4S/2M axle control.
Provide power to the MC-30
controller
and verify the current con guration
using the LEDs or blink codes.
4S/2M Axle
Hold magnet in place for 20
seconds.
The LEDs will begin to roll as the
installed sensors and modulators are
detected.
Remove the magnet.
2S/2M Axle
Stop! You do not need to perform an
ABS control toggle in this case.
Verify the new con guration using
the LEDs or blink codes.
4S/2M Axle to 2S/2M Axle
CHART 7 - EXAMPLES OF SELF-CONFIGURATION AND ABS CONTROL TOGGLE (2 of 2)
Your trailer has two wheel speed
sensors and two ABS modulators
that are plumbed for side control.
The MC-30
controller you have
installed is currently con gured for
4S/2M side control.
Provide power to the MC-30
controller
and verify the current configuration
using the LEDs or blink codes.
4S/2M Side
Hold magnet in place for 20
seconds.
The LEDs will begin to roll as the
installed sensors and modulators are
detected.
Remove the magnet.
2S/1M Dolly-Axle
Stop! You do not need to perform an
ABS control toggle in this case.
Verify the new con guration using
the LEDs or blink codes.
4S/2M Side to
2S/1M Dolly-Axle
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire