BENDIX GEN 4 GEN 5 ABS Guide de l'utilisateur télécharger pdf (Page 3)

Windows NT, Windows 2000, Windows Vista and

Windows XP are either registered trademarks or

trademarks of Microsoft Corporation in the United

States and/or other countries.

This guide, as well as the software described in it,

is furnished under license and may only be used or

copied in accordance with the terms of the license.

Please contact the Bendix Tech Team for a copy of

such license.

The information provided in this manual is for

informational purposes only and is subject to change

without notice and should not be construed as a

guarantee by Bendix Commercial Vehicle Systems

LLC (“Bendix”). Bendix assumes no responsibility

or liability for any errors or inaccuracies that may

appear in this publication nor within the software

itself. User is using the software “as-is”, “where-is”

with no warranty implied or otherwise. At no time

shall Bendix be liable to user for any direct, special,

indirect, consequential, liquidated, punitive, or

progressive damages relative to the use of the

software hereunder.

General Information

ACom

™

diagnostics will provide the technician with the

capability to view and repair ABS component diagnostic

trouble codes, monitor wheel speeds, display and edit

conﬁ guration of ABS ECU, self-conﬁ gure ABS ECU, and

test ABS components. Additionally, ACom diagnostics

will support Adaptive Cruise with Braking (ACB).

This application will support the Bendix

EC-60

™

Bendix

EC-17, Bendix

EC-30

™

, Gen 4, Gen 5 (U12

and U16), ABS 2X, Bendix

TABS-6, Bendix

TABS-6

ADV, Bendix

TABS-6 ADV MC

™

, Bendix

EC-30T

™

A-18 ABS ECUs and ACB.

The application requires the usage of an RP1210

compliant adapter. A list of the recommended adapters

is shown below.

RP1210 adapters

ACom

™

Diagnostics relies on RP1210 compliant

hardware adapters for communication.

NOTE: ACom

™

Diagnostics will remain in the demo

mode unless there is at least one RP1210 driver

installed on the computer.

The following are a list of supported hardware adapters

for the software. Verify that the driver (.dll) for the

adapter to be used for communications is loaded on

the computer.

• Nexiq – Parallel Data Module (PDM)/USB Adapter

Parallel Data Module (PDM)

• Nexiq – USB Link (USB)

• Nexiq – Wireless Vehicle Link (WVL)

• Noregon – PLC-1708 Adapter

• Noregon – Data Link Adapter USB

• Noregon – Data Link Adapter + PLC

• Dearborn – Adapter III and DPA 4+ USB

• Bendix – Brake Link Adapter

• IC3Com Interface

• IC4Com USB Interface

• EZTech Link (Wireless)

• Navcom

• Eaton – MD 100

• Movimento Puma 2

• Volvo/Mack 88890020

Known Issues with RP1210 adapters

• Tool does not support two adapters connected at

the same time.

• Noregon PLC - 1708 Adapter does not support

serial to USB adapter connection.

• Dearborn DPA3 and DPA4 CAN communication

issues when using slower computers.

• Noregon PLC/J1708 and Brake Link do not support

serial to USB adapter connection.

• Noregon DLA CAN communication issues with

serial DLA.

• Communication issues with Nexiq PDM - technician

may need to close the program and restart.

PC hardware requirements

ACom

™

diagnostic software will run on Windows NT,

2000, XP, and Vista operating systems. Below are the

minimum requirements for running the application.

• Intel PIV processor or compatible, 2 GHz

• 512 MB RAM

• 400 MB free disk space

• Microsoft Internet Explorer

• Adobe Acrobat

• Communication port (serial, parallel, or USB

depending on RP1210 adapter)

• VGA standard graphics adapter, 800 x 600 resolution

(1024 x 768 primary usage)

• Windows compatible keyboard and mouse

NOTE: Tool does not support Windows 95 and 98

operating systems.

Technical Assistance

For any questions regarding setup or operation

of ACom

™

diagnostics please contact Bendix at

1-800-AIR-BRAKE (1-800-247-2725).

Additionally, monitor the Bendix website, www.bendix.

com for updates to the software.

Licensing Information

BENDIX

“ACom

™

diagnostic software” requires

an end user license agreement which the user

will need to agree to prior to the software being

installed on the user’s computer.

1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

BENDIX GEN 4 GEN 5 ABS Guide de l'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Modulateur BENDIX GEN 4 GEN 5 ABS