BENDIX BW2771 Manuel d'utilisateur télécharger pdf (Page 42)

General Information

Appendix 3 continued

Fine-Tuning the Horizontal Alignment

Ifthealignmentfunctioninthediagnosticsoftwarecontinuouslyshowsanazimuthvaluegreaterthan0.5°orlessthan-0.5°,thentheFLR

needs to be physically adjusted in the horizontal direction beyond that already completed.

Center FLR Azimuth Position (FLR aligned correctly)

Ifthealignmentfunctionconsistentlyshowsanazimuthvalueof0°+/-0.5°whentrackingavehicleinthesamelane,thentheFLRis

properly centered. In this case, the FLR does not need to be further aligned and the procedure is complete.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

Pas de commentaire

BENDIX BW2771 Manuel d'utilisateur Page 42