BENDIX BW7273 Manuel d'utilisateur télécharger pdf (Page 21)

Replacing Slide Pins, Slide

Bushings, & Boots

1. Put the disc brake assembly in a vise. 3. Remove the four (4) bolts for the slide pins using Torx E 18

socket.

Removing Slide Pins, Slide Bushings, and

Boots (Frame)

1 – Protection cap 3 – Caliper

2 – Carrier

1 – Slide pins 3 – Carrier

2 – Caliper

2. Remove protection caps using a hammer and chisel. If the

inner part of the protection cap remains in the slide pin,

remove this using an internal bearing puller.

Note: Protection caps must never be reused.

4. Retract the slide pins sufﬁ ciently to remove frame from caliper

by alternately pushing frame to and fro. If slide pins are

seized in the frame, cut threads internally in slide pins using

an M16x2 thread tap.

WARNING: To prevent injury, only grip from outside.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

BENDIX BW7273 Manuel d'utilisateur Page 21